How do I remove my blades?

Detachable Blade System - Enables you to quickly change from a standard-width blade for full grooming to a narrow-width blade for detail trimming around a mustache, goatee, or anywhere to define the hair line and clip any stray whiskers. To remove attachment, simply pull top edge of blade away from body unit. To attach, align back tab of attachment head to cavity on the inner edge of trimmer unit and push down on top of blade.

Standard Blade: Unscrew the stationary bottom blade and top blades from the unit. Clean hair from unit and attachment. Replace with new blades and align : If your clipper has a taper lever, position the lever in the close cut position.

1. End of top blade teeth should be approximately 1/32-inch (.64 mm) back from bottom blade.

2. Extreme left-hand tooth of top blade must be covering or to the left of the first small tooth of bottom blade.

3. Extreme right-hand tooth of top blade must be touching the big tooth on the bottom blade.

If blade alignment is incorrect, add a few drops of Wahl Clipper Oil to the blades, turn clipper “On” for a few moments, turn “OFF” and unplug. Loosen screws slightly and adjust. Tighten screws after blades are aligned.